Today is 2020-07-14 Tuesday,Welcome to this site 

Home > News > FAQ

FAQ

Precautions for glass maintenance

Word:[Big][Middle][Small] QR Code 2017/12/9     Viewed:    


  1, usually do not impact the glass surface, in order to prevent the glass face scraping, better spread on the tablecloth. When you put things on the glass furniture, you should take the light and avoid the collision.

  2, daily cleaning, wipe with wet towel or newspaper. If stains can be dipped in beer or warm vinegar, towel can also be used in the market, and it should be cleaned with strong acid and alkali solution. In winter, the surface of glass is easy to frosting, and it can be dipped in strong salt water or liquor to wipe, and the effect is very good.

  3. Once the glassy glass is dirty, it can be removed with a toothbrush dipped in a cleaning agent and wiped along the pattern. In addition, kerosene can be dripped on the glass or dipped in water with chalk and gypsum powder to dry on the glass, then wipe with clean cloth or cotton, so that the glass is clean and bright.

  4, glass furniture is placed in a relatively fixed place, do not move back and forth at will. To place objects smoothly, heavy objects should be placed on the bottom of glass furniture to prevent the furniture's unstable center of gravity from overturning. In addition, to avoid moisture, away from the stove, and the chemical reagents such as acid, alkali, and other chemical reagents to prevent corrosion deterioration.

  5, the use of preservative film and the wet cloth with detergent can also make the glass, which is often stained with oil, "reborn again". First, the glass spray on the detergent, and then paste the fresh-keeping film, so that the solidified oil stains softened, after ten minutes, tearing off the preservation film, and then wiped with wet cloth. In order to keep the glass clean and bright, must often hands clean glass, if there is a handwriting, use a rubber soaking friction, then a damp cloth; if the glass paint, use cotton dipped in hot vinegar wash; wipe the glass with clean dry cloth dipped in alcohol, so that it can be as bright as crystal.

  Wiping glass

  1: first, wipe the glass glass frame clean with a towel, and then stained glass glass blowing water diluted solution, uniform from top to bottom with glass, repeat the above process, the glass blowing from top to bottom and scraped, with a dry towel wipe box on the left water marks on the glass. The water mark must use windscreen clean, otherwise it will leave a mark on the glass.

  2, the proportion of vinegar and water in proportion to 1:2, put into the spray, spray on the glass and then wipe, can be clean very clean.

  3, in the basin with 5% ammonia solution or gasoline, the cleaning of the glass, the glass to be slightly dry with a dry cloth to wipe clean, the glass can be clean, bright and transparent. When cleaning the glass, you can use different models of the window wiping device to see whether it is a double glazing or a single layer of glass. It is convenient, labor-saving and safe to use the window cleaning device.

  4, such as the surface of glass mildew, can be mixed with hydrofluoric acid (HF) proportion of water 1:8 (Note: more than 1:8, it will damage the hand, wipe the glass). Note: be sure to do the corrosion protection work, the skin may not contact HF, otherwise it will end after severe corrosion! Wipe glass, with water and then wipe dry the glass again.


Go Back
Print
13605547332
浏览手机站